Job opportunity
Quality Control Inspector
Minth Windsor Manufacturing
The Quality Control (QC) Inspector is responsible for inspecting incoming materials, in-process components, and finished products to ensure compliance with Minth quality standards, customer requirements, and applicable automotive regulations. This role is critical in a new manufacturing site environment, supporting the establishment of a strong quality culture, stable processes, and zero-defect mindset from launch.
The QC Inspector works closely with Quality Engineering, Production, Logistics, and Suppliers to prevent nonconformities, contain quality risks, and guarantee that only conforming material is released to production and customers.
Position Summary
The Quality Control (QC) Inspector is responsible for inspecting incoming materials, in-process components, and finished products to ensure compliance with Minth quality standards, customer requirements, and applicable automotive regulations. This role is critical in a new manufacturing site environment, supporting the establishment of a strong quality culture, stable processes, and zero-defect mindset from launch.
The QC Inspector works closely with Quality Engineering, Production, Logistics, and Suppliers to prevent nonconformities, contain quality risks, and guarantee that only conforming material is released to production and customers.
Key ResponsibilitiesIncoming Material Inspection
Perform inspection and verification of
incoming raw materials, components, and purchased parts
according to control plans, drawings, specifications, and inspection standards.
Ensure material complies with
customer, internal, and automotive quality requirements
before release to production.
Identify, segregate, and label
non-conforming material
and initiate containment actions.
Complete inspection records, reports, and traceability documentation accurately and on time.
In-Process & Final Inspection
Conduct
in-process inspections
to verify critical characteristics and process compliance.
Perform
final product inspections
prior to shipment when required.
Support launch activities, trial runs, and new process validations.
Measurement & Equipment
Use measuring equipment such as
calipers, micrometers, height gauges, CMM, gauges, and visual aids
according to work instructions.
Ensure proper handling and care of inspection equipment.
Verify that gauges and measurement devices are
within calibration validity .
Quality System & Documentation
Follow established
Control Plans, Work Instructions, PFMEA outputs, and Inspection Standards .
Support compliance with
IATF 16949 , customer-specific requirements, and internal Minth procedures.
Assist in preparation for
internal and external audits
by providing inspection evidence and records.
Nonconformance & Problem Escalation
Immediately report quality issues, defects, or abnormal trends to Quality Engineering and supervision.
Support
root cause analysis and corrective actions
by providing inspection data and observations.
Participate in containment, sorting, and rework activities when required.
Safety & 5S
Follow all
health, safety, and environmental regulations .
Maintain a clean and organized work area following
5S principles .
Qualifications & RequirementsEducation
High school diploma or technical diploma required.
Technical education in manufacturing, quality, or engineering is an asset.
Experience
1–3 years of experience in
quality control or inspection , preferably in the
automotive manufacturing industry .
Experience in a
new plant launch
or high-volume manufacturing environment is an asset.
Technical Skills
Ability to read and interpret
engineering drawings and specifications .
Knowledge of
basic GD&T
concepts.
Familiarity with
automotive quality standards
(IATF 16949 preferred).
Basic understanding of control plans, inspection methods, and defect classification.
Soft Skills
Strong attention to detail and sense of responsibility.
Ability to work in a
fast-paced, structured manufacturing environment .
Clear communication skills and willingness to escalator issues.
Team-oriented mindset with a focus on quality and continuous improvement.
Working Conditions
Manufacturing plant environment.
Standing, walking, and manual handling of parts as required.
Shift work may be required based on production needs.
#J-18808-Ljbffr
Apply on source site The QC Inspector works closely with Quality Engineering, Production, Logistics, and Suppliers to prevent nonconformities, contain quality risks, and guarantee that only conforming material is released to production and customers.
Position Summary
The Quality Control (QC) Inspector is responsible for inspecting incoming materials, in-process components, and finished products to ensure compliance with Minth quality standards, customer requirements, and applicable automotive regulations. This role is critical in a new manufacturing site environment, supporting the establishment of a strong quality culture, stable processes, and zero-defect mindset from launch.
The QC Inspector works closely with Quality Engineering, Production, Logistics, and Suppliers to prevent nonconformities, contain quality risks, and guarantee that only conforming material is released to production and customers.
Key ResponsibilitiesIncoming Material Inspection
Perform inspection and verification of
incoming raw materials, components, and purchased parts
according to control plans, drawings, specifications, and inspection standards.
Ensure material complies with
customer, internal, and automotive quality requirements
before release to production.
Identify, segregate, and label
non-conforming material
and initiate containment actions.
Complete inspection records, reports, and traceability documentation accurately and on time.
In-Process & Final Inspection
Conduct
in-process inspections
to verify critical characteristics and process compliance.
Perform
final product inspections
prior to shipment when required.
Support launch activities, trial runs, and new process validations.
Measurement & Equipment
Use measuring equipment such as
calipers, micrometers, height gauges, CMM, gauges, and visual aids
according to work instructions.
Ensure proper handling and care of inspection equipment.
Verify that gauges and measurement devices are
within calibration validity .
Quality System & Documentation
Follow established
Control Plans, Work Instructions, PFMEA outputs, and Inspection Standards .
Support compliance with
IATF 16949 , customer-specific requirements, and internal Minth procedures.
Assist in preparation for
internal and external audits
by providing inspection evidence and records.
Nonconformance & Problem Escalation
Immediately report quality issues, defects, or abnormal trends to Quality Engineering and supervision.
Support
root cause analysis and corrective actions
by providing inspection data and observations.
Participate in containment, sorting, and rework activities when required.
Safety & 5S
Follow all
health, safety, and environmental regulations .
Maintain a clean and organized work area following
5S principles .
Qualifications & RequirementsEducation
High school diploma or technical diploma required.
Technical education in manufacturing, quality, or engineering is an asset.
Experience
1–3 years of experience in
quality control or inspection , preferably in the
automotive manufacturing industry .
Experience in a
new plant launch
or high-volume manufacturing environment is an asset.
Technical Skills
Ability to read and interpret
engineering drawings and specifications .
Knowledge of
basic GD&T
concepts.
Familiarity with
automotive quality standards
(IATF 16949 preferred).
Basic understanding of control plans, inspection methods, and defect classification.
Soft Skills
Strong attention to detail and sense of responsibility.
Ability to work in a
fast-paced, structured manufacturing environment .
Clear communication skills and willingness to escalator issues.
Team-oriented mindset with a focus on quality and continuous improvement.
Working Conditions
Manufacturing plant environment.
Standing, walking, and manual handling of parts as required.
Shift work may be required based on production needs.
#J-18808-Ljbffr